• One bottle replaces up to 32 bottles of the leading anti-bacterial all-purpose cleaner
• Cleans, disinfects and deodorizes
• Concentrated cleaner, sanitizer, fungicide, virucide and mildewstat
• Phosphate free
• Readily biodegradable
• Perfect for bathrooms, kitchens, hospitals, pet kennels, nursing homes, athletic/recreational facilities, food service establishments and much more!
• EPA-registered disinfectant (EPA Reg. No. 1839-95–68709; EPA Est No. 55948-NC-01)

Snap II Cleaner Disinfectant is a phosphate-free formulation designed to provide effective cleaning, deodorisation and disinfection specifically for hospitals, nursing homes, schools, food processing plants, food service establishments, transportation terminals, office buildings, manufacturing facilities, lodging establishments, retail businesses, athletic/recreational facilities and households where housekeeping is of prime importance in controlling the hazard of cross-contamination. Snap II Cleaner Disinfectant is EPA Registered (EPA Reg. No. 1839-95 – 55948; EPA Est. No. 55948-NC-01). Make household disinfecting a SNAP with Snap II Cleaner Disinfectant!

Cleaning agents and sudsing agents (anionic and nonionic surfactants), water, quality control agents, stabilising agents, aloe vera gel, fragrance, and FD&C colour.

How do I use Shopping Annuity Brand Snap II Cleaner Disinfectant?

DISINFECTION: To disinfect inanimate, hard, non-porous surfaces, add 2 ounces / 60 ml of Shopping Annuity Brand Snap II Cleaner Disinfectant per gallon/3700ml water. Apply solution with a mop, cloth, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes, then remove excess liquid. For heavily soiled areas, a pre-cleaning step is required. Prepare a fresh solution for each use.

To disinfect toilet bowls: Flush toilet and add 2 ounces / 60 ml of Snap II Cleaner Disinfectant directly to the bowl water. Swab the bowl completely using a scrub brush or toilet mop, making sure to get under the rim. Let stand for 10 minutes and flush.

To disinfect food processing premises: Before using this product, food products and packaging materials must be removed from the area or carefully protected. For floors, walls and storage areas, add 2 ounces / 60 ml of Snap II Cleaner Disinfectant per gallon/3700 ml water. For heavily soiled areas, a pre-cleaning step is required. Apply solution with a mop, cloth, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer so as to wet all surfaces thoroughly. Allow the surface to remain wet for 10 minutes, then removed excess liquid. After use, all surfaces in the area must be thoroughly rinsed with potable water.

To disinfect food-service establishment food contact surfaces: Before using this product, food products and packaging materials must be removed from the area or carefully protected. For countertops, appliances and tables, add 2 ounces / 60 ml of Snap II Cleaner Disinfectant per gallon/3700 ml water. For heavily soiled areas, a pre-cleaning step is required. Apply solution with a cloth, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer so as to wet all surfaces thoroughly. Allow the surface to remain wet for 10 minutes, then removed excess liquid and rinse the surface with potable water. This product cannot be used to clean the following food contact surfaces: utensils, glassware and dishes.

BACTERICIDAL ACTIVITY: When diluted at the rate of 2 ounces / 60 ml per gallon/3700 ml water, Snap II  Cleaner Disinfectant exhibits effective, one-step disinfectant activity against the organisms: Pseudomonas aeruginosa PRD 10, Escherichia coli , Klebsiella pneumonia , Salmonella schottmuelleri , Salmonella enterica , Streptococcus salivarius , Brevibacterium ammoniagenes , Streptococcus faecalis , Shigella dysenteriae , Enterobacter aerogenes , Staphylococcus aureus , Methicillin-Resistant Staphylococcus aureus (MRSA), Vancomycin Intermediate Resistant Staphylococcus aureus (VISA) and Streptococcus pyogenes (Clinical-Flesh-Eating Strain BIRD M3) and meets all requirements for hospital use in US.

FUNGICIDAL ACTIVITY: At the 2 ounces / 60 ml per gallon/3700 ml dilution, Snap II Cleaner Disinfectant is also fungicidal against the pathogenic fungi Trichophyton mentagrophytes (causative agent of athlete’s foot fungus, a cause of ringworm of the foot ) when used as directed on hard surfaces found in bathrooms, shower stalls, locker rooms, exercise facilities or other clean, hard, non-porous surfaces commonly contacted by bare feet. Follow the Disinfection directions. 

MILDEWSTAT: To control mold and mildew on pre-cleaned, hard, non-porous surfaces, add 2 ounces / 60 ml of Snap II Cleaner Disinfectant per gallon/3700 ml water. Apply solution with a cloth, mop, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer making sure to wet all surfaces completely. Let air dry. Prepare a fresh solution for each use. Repeat application at weekly intervals or when mildew growth appears.

VIRUCIDAL ACTIVITY: Snap II Cleaner Disinfectant, when used on environmental, inanimate, hard, nonporous surfaces at 2 ounces / 60 ml per gallon/3700 ml water, exhibits effective virucidal activity against Influenza A2/Japan (representative of the common flu virus), Herpes Simplex Type 1 (causative agent of fever blisters), Adenovirus Type 2 (causative agent of upper respiratory infections), Vaccinia virus (representative of the Pox virus group), Human Coronavirus (ATCC VR-740, Strain 229E), Human Immunodeficiency Virus Type I (HIV 1), Hepatitis B Virus (HBV), Hepatitis C Virus (HCV), Norovirus (Norwalk Virus), Bovine Viral Diarrhea Virus (BVDV), Feline calicivirus (FCV), SARS Associated Coronavirus, Porcine Respiratory & Reproductive Syndrome Virus (PRRSV) (Strain NVSL) and Avian Influenza A. Follow the Disinfection directions. KILLS HIV-1, HBV AND HCV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS in healthcare settings (hospitals, nursing homes) or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surface/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1) (associated with AIDS), Hepatitis B Virus (HBV) and Hepatitis C Virus (HCV).

SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1, HBV, AND HCV ON SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS:

PERSONAL PROTECTION: When handling items soiled with blood or body fluids, use disposable latex gloves, gowns, masks and eye coverings.

CLEANING PROCEDURES: Blood and other body fluids must be thoroughly cleaned from surfaces and objects before application of Snap II Cleaner Disinfectant.

CONTACT TIME: Allow surface to remain wet for 10 minutes.

DISPOSAL OF INFECTIOUS MATERIALS: Blood and other body fluids should be autoclaved and disposed of according to local regulations for infectious waste disposal. Efficacy test have demonstrated that this product is an effective bactericide, fungicide and virucide in the presence of organic soil (5% blood serum). 

GENERAL CLEANING: Apply Snap II Cleaner Disinfectant to soiled area with a mop, cloth, sponge, hand-pump trigger sprayer or low-pressure coarse sprayer. Snap II Cleaner Disinfectant can be diluted at 2 ounces / 60 ml per gallon / 3700 ml or applied at full strength. Thoroughly wet soiled surface and scrub as necessary.

DEODORIZATION: To deodorize, apply this product as indicated under the heading Disinfection.

Where are Snap II Cleaner Disinfectant made in?

Snap II Cleaner Disinfectant are made in USA.